Removing The Power-Adapter Port; Prerequisites; Procedure - Dell Alienware 17 R5 Service Manual

Removing the power-adapter port

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Follow the procedure from step 1 to step 4 in
3 Remove the
4 Remove the
5 Remove the
6 Remove the
7 Remove the
8 Follow the procedure from step 1 to step 22 in

Procedure

1 Remove the screw (M2x3) that secures the power-adapter port bracket to the
palm-rest assembly.
2 Lift the power-adapter port bracket off the power-adapter port.
3 Lift the power-adapter port off the palm-rest assembly.
4 Peel the tape to access the power-adapter port cable on the palm-rest
assembly.
84
base cover.
wireless card.
solid-state drive.
memory modules.
rear-I/O cover.
computer base.
computer. After working inside your
After working inside your
"Removing the hard
"Removing the system
computer.
drive".
board".