HTC U11 Manual page 2

HTC U11
___ Inserting nano SIM and microSD cards
IMPORTANT:
Use a standard nano SIM only.
Don't cut a micro or regular SIM card and insert it into the
nano SIM slot. It's thicker than the standard nano SIM card and
may get stuck in the slot.
Don't disassemble any part of the phone.
Don't try to open the phone or remove the battery by force. This
may damage the phone or its electronics and will invalidate the
warranty.
Don't throw the tray away.
You need it to insert your nano SIM and microSD™ cards.
1
2
gold contacts
nano SIM
cut-off corner
1. With the phone facing up,
insert the tip of the tray eject
tool that came in the box (or
a small bent paperclip) into
the tray eject hole. Push the
tip all the way into the hole
until the card tray ejects.
Pull the tray out.
2. With the nano SIM card's
gold contacts facing down,
place the card into the SIM
holder of the tray.
Make sure to align the cut-
off corner to the notch on
the holder.