Dehumidifying Operation; Cooling/Heating/Fan Operation - Electrolux EXS09JEIW User Manual

Dehumidifying Operation

SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
C
MODE
A
HORIZONTAL/
SWING
VERTICAL/
SWING
FOLLOW
ME

Cooling/Heating/Fan Operation

SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
D
MODE
A
HORIZONTAL/
SWING
VERTICAL/
SWING
FOLLOW
ME
FAN
HIGH
MED
LOW
TEMP
B
ON/OFF
FAN SPEED
TIMER ON
SLEEP
TIMER OFF
RESET LOCK
TURBO
FAN
HIGH
MED
LOW
TEMP
B
ON/OFF
FAN SPEED
C
TIMER ON
SLEEP
TIMER OFF
RESET LOCK
TURBO
1. Press the MODE button to select DRY
mode.
2. Press the TEMP button to set the
desired temperature. The temperature
can be set within a range of
17ºC/62ºF~30ºC/88ºF in 1ºC/2ºF
increments.
3. Press the ON/OFF button to start the
air conditioner.
In the Dehumidifying mode, you
can not switch the fan speed. It
has already been automatically
controlled.
1. Press the MODE button (A) to select
COOL, HEAT (Reverse cycle models
only) or FAN mode.
2. Press the TEMP button (B) to
set the desired temperature. The
temperature can be set within a range
of 17ºC/62ºF~30ºC/88ºF in 1ºC/2ºF
increments.
3. Press the FAN SPEED button (C) to
select the fan speed in four steps -
Auto, Low, Med, or High.
4. Press the ON/OFF button (D) to start
the air conditioner. The OPERATION
indicator on the display panel of the
indoor unit illuminates. The operating
mode is selected in accordance with
the room temperature and operation
starts after approximately 3 minutes (If
you select FAN mode, the unit will start
immediately).
In the Fan mode, the setting
temperature is not displayed in
the remote controller and you
are not able to control the room
temperature either. In this case,
only step 1, 3 and 4 may be
performed.
ENGLISH 15