Sensitech FreezeAlert Instructions For Use

Indicator

Enlarged version

Millions Depend on the Integrity of Your Product.

Sensitech's Mission is to Ensure that Integrity.

The Tools That Turn Information Into Power

FreezeAlert™

Indicator

Instructions For Use

TempTale Manager

Data Management Services

RF Monitoring

Desktop Software

TempTale

4 Monitor

TempTale

4 USB Monitor

TagAlert

Indicator

For more information, contact our client services

group at 800-843-8367.

Sensitech Inc. • 800 Cummings Center, Suite 258X • Beverly, MA 01915

1-800-843-8367 • +1-978-927-7033 • Fax 978-921-2112 • www.sensitech.com

T83001550 Rev. C 07/09/14

Table of Contents

Need help?

Do you have a question about the FreezeAlert and is the answer not in the manual?

Page 1 ® For more information, contact our client services group at 800-843-8367. Sensitech Inc. • 800 Cummings Center, Suite 258X • Beverly, MA 01915 1-800-843-8367 • +1-978-927-7033 • Fax 978-921-2112 • www.sensitech.com © 2014 Sensitech, Inc. All Rights Reserved. T83001550 Rev. C 07/09/14...
Page 2 Starting a FreezeAlert™ Indicator Reading a FreezeAlert Indicator • Push the Start button on the front of the device and hold it for • Once the package has arrived at its destination, remove the FreezeAlert approximately 2 seconds. indicator from the package and immediately examine the indicator. • The LCD display will respond by “ ” (Figure 1) and flashing • If the LCD is displaying “ ”, no alarms have been triggered during the “ ” icon once per second. the trip (Figure 1). • After activation, remove the back sticker label and affix the indicator • If the LCD is displaying “ ”, the alarm has been triggered (Figure 2). to an instruction card or directly to a clean, dry surface on the product or package. Figure 1 Figure 2...