Sensitech TempTale 4 Instructions For Use

Dry ice probe monitor

Hide thumbs Also See for TempTale 4:

Download this manual

Enlarged version

Millions Depend on the Integrity of Your Product.

Sensitech's Mission is to Ensure that Integrity.

The Tools That Turn Information Into Power

TempTale

4 Dry Ice

Probe Monitor

Instructions For Use

TempTale Manager

Data Management Services

RF Monitoring

Desktop Software

TempTale

4 Monitor

TempTale

4 USB Monitor

TagAlert

Indicator

For more information, contact our client services

group at 800-843-8367.

Sensitech Inc. • 800 Cummings Center, Suite 258X • Beverly, MA 01915

1-800-843-8367 • +1-978-927-7033 • Fax 978-921-2112 • www.sensitech.com

T83000820 Rev. D 07/09/14

Need help?

Do you have a question about the TempTale 4 and is the answer not in the manual?

Page 1 ® For more information, contact our client services group at 800-843-8367. Sensitech Inc. • 800 Cummings Center, Suite 258X • Beverly, MA 01915 1-800-843-8367 • +1-978-927-7033 • Fax 978-921-2112 • www.sensitech.com © 2014 Sensitech, Inc. All Rights Reserved. T83000820 Rev. D 07/09/14...
Page 2 Preparing a TempTale 4 Dry Ice Probe Monitor for Shipment To mark an important event (“Date Stamp”) ® • Prepare your container for shipment according to your SOP • TempTale4 Dry Ice Probe monitors provide an option to “Date Stamp” or mark an important (Standard Operating Procedure) for dry ice pack outs. event at any time during the monitoring cycle that will be visible when viewing the data. • At the point in the SOP where dry ice fills a portion of the box and The mark is displayed as an arrow when viewing the Graph and shown in italics when the product is enclosed, press and release the Green/left Start button viewing Tabular data. on the TempTale 4 Dry Ice Probe Monitor. • To mark an event while the monitor is recording, press and release the “Start” button. ® • Verify that the “Sunshine” icon appears in the upper left • The “arrow” icon will appear temporarily in the lower left corner and the temperature corner of the display. history will appear on the display. Data appears as follows: • Place the probe of the TempTale4 Dry Ice Monitor as close to 1.