Sensitech ThermoAlert Instructions For Use

Indicator

Enlarged version

Millions Depend on the Integrity of Your Product.

Sensitech's Mission is to Ensure that Integrity.

The Tools That Turn Information Into Power

ThermoAlert™

Indicator

Instructions For Use

TempTale Manager

Data Management Services

RF Monitoring

Desktop Software

TempTale

4 Monitor

TempTale

4 USB Monitor

TagAlert

Indicator

For more information, contact our client services

group at 800-843-8367.

Sensitech Inc. • 800 Cummings Center, Suite 258X • Beverly, MA 01915

1-800-843-8367 • +1-978-927-7033 • Fax 978-921-2112 • www.sensitech.com

T83001710 Rev. C 07/09/14

Table of Contents

Need help?

Do you have a question about the ThermoAlert and is the answer not in the manual?

Page 1 ® For more information, contact our client services group at 800-843-8367. Sensitech Inc. • 800 Cummings Center, Suite 258X • Beverly, MA 01915 1-800-843-8367 • +1-978-927-7033 • Fax 978-921-2112 • www.sensitech.com © 2014 Sensitech, Inc. All Rights Reserved. T83001710 Rev. C 07/09/14...
Page 2 Starting a ThermoAlert™ Indicator Reading a ThermoAlert Indicator • Push the Start button on the front of the device and hold it for • Once the package has arrived at its destination, remove the ThermoAlert approximately 3 seconds. indicator and immediately examine the indicator display screen. • The display will respond with a “ ” and flashing “ ” icon once • If the display presents a “ ”, no alarms have been activated during per second. (Figure 1). the trip (Figure 1). • Remove the back sticker label and affix the indicator to an instruction • If the display presents an “ ”, an alarm has been activated. card or directly to a clean, dry surface on the product or package. – If the display presents “ ”, the high temperature alarm (>) has been activated. (Figure 2). • After the start delay period has expired, the ThermoAlert will begin monitoring time-temperature alarm conditions. – If the display presents “ ”, the low temperature alarm (<) has been activated.