..
~
2. Handling of Thermal Printer
2·' How to Set Thermal Paper
1.
Lift up this end of the cover on the Printer.
2.
Pass the rod through the Roll Paper and place the
Roll Paper in the holder. As printing is done on
the outside of the Roll Paper, set the roll paper
as the picture shows.
3.
I nsert the tip of the Roll Paper straight into the
feed er.
4.
Advance the Roll Paper forward by depressing
the
key.
Note:
To change the Roll Paper, cut off the tip of
the paper from the ro!l, and depress the
key to remove the tip, and then,
take the roll au t of th e holder.
2·2 Changing the Roll Paper from 48·digit (24-digitl
to 24.digit (48-digit)
When changing Roll Paper to one with a different
paper width, set the Digit Selection Knob accord ing
to the width, you intend to use.
(1)
I n case of changing from the 48·digit paper to
the 24-digit paper:
o
(2) I n case of changing from the 24-digit paper to
the 48-digit paper:
I)
48
)10
24
",r--!Tr.
g
: ' 1 1
:1:
~----~:=.
======
4)
+ -
R.· . . . : "
lUI
Note:
Don't touch the Digit Selection Knob while
the Roll Paper is still in the holder.
()
As for cleaning the pri nting head, see the
description of "How to use the Printer Head
Cleaner".
9