Table of Contents
Advertisement
Program coding for the character output
is done in the same way as manual print-
ing of the characters. However, in pro·
gram, print of the ch aracters which have
no corresponding keys are available by
inputting them using
key as
Refer to the Character Code Table to
input the character code. (P28)
Example:
SPACE
A
B
C
SPACE
a
b
c
CHARACTER PRINT
'·8
Other Instructions
Since the following instructions don't have their
own keys, input is done by using the
key.
SET ERROR DISABLE
SED I nstru ction
Prevents the calculator from stopping
even when there is an error. This is
essential before using the IF ERROR
GO TO instruction.
Input key operation:
~ ~
RESET ERROR DISABLE
RED instruction
Resets SED instruction.
I nput key operation: {
'':,';,T
1
SET ERROR
Set error instruction
Sets to the erroneous conditon.
Input key operation: {
'':,';,T ]
RESET ERROR
Reset error instruction
Resets erroneous cond ition
Input key operation:
~
(Regarding the usage of above four instructions,
please see
IV §2. '·6 P20)
NON OPERATION
Non operation instruction
Input key operation:
PROGRAM·PAGE n
Instructs program page.
Input key operation:
~
(D~n~3)
DATA·PAGE n
Instructs data page.
Input key operation:
:,:;--J
(O~n~4)
(For details and information about pages, see IV
P 39).
24
Advertisement
Table of Contents
