Oceanic OCEACPM2G2V Operating & Installation Instructions Manual page 11

INSTALLATION AND PREPARATIONS FOR USE
• Apply the adhesive sealing material "C" all the way round the aperture on the worktop to match
the outher perimeter edge of the appliance. Ensure that the junctions overlap at the corners
and no gap is left along the sealing material.
• Check the type of the brackets supplied in the assembly kit in Figure-7 and Figure-8 and
continue accordingly;
Brackets of Type-1
Insert the appliance into the aperture and fix in position via the brackets (A) and screws (B).
Adjust the position of the brackets depending on the thickness of the worktop as indicated in
Figure-7 and tighten the screws evenly.
Bracket Type 1
Brackets of Type-2
Fix the brackets (A) via the screws (B) on the bottom cover of the appliance as shown in Figure-8.
Insert the appliance into the aperture and apply pressure on the cooktop, ensure the appliance
is positioned tightly.
Bracket Type 2
A
Hob
B
C
Worktop
A
B
Hob
C
t<25mm
Tt
Worktop
10
C
t>25mm
A
B
Figure 7 - Installation with
Bracket Type 1
Figure 8 - Installation with
Bracket Type 2
Tt