Contents Important Safety Instructions Product Overview Getting Started Operating Instructions Other Useful Information After Sales Support (AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org...
Important Safety Instructions Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Make sure you understand all instructions and warnings.
Page 4
Important Safety Instructions (Cont.) • After use: Always disconnect power when the heater is not in use and before cleaning, servicing or moving the heater. To disconnect the heater, switch it off and remove the plug from outlet. When disconnecting, grip the plug, do not pull on the cord.
Page 5
Important Safety Instructions (Cont.) • Usage restriction: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of expe- rience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Product Overview Front view Top view: control panel Parts of the heater Air Outlet Control Panel and Display (see opposite for details) Power Switch [ I / O ] Power Cord and Plug Wall-Mounting Brackets (4, already affixed to the back for wall-mounting) Stand feet (2) (for freestanding use) Installation hardware (not shown) ø...
Page 7
Product Overview (Cont.) Control Panel Buttons and Indicators LED Display Power, Timer and Heater Indicators TIMER Button Button ON/OFF Button POWER Switch [ I / O ] G DOWN Button HEATER Button NOTE: Due to continued product improvement, images and illustrations in this manual may vary slightly from the product purchased.
Getting Started Unpacking • Carton: This product has been packaged to protect it against transportation damage. Unpack the appliance and keep the original packaging carton and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use.
Page 9
Getting Started (Cont.) Wall-Mounting IMPORTANT! • Only mount this heater on a structurally sound, heat-resistant wall area that is strong enough to hold the weight of the heater. If in doubt, consult a builder. Do not mount this heater on the ceiling! •...
Page 10
Getting Started (Cont.) Stand Assembly (for freestanding use) If you want to use your heater freestanding, follow the instructions below for attaching the stand feet. • Place a soft towel on a table or benchtop and carefully place the heater upside down.
Operating Instructions Using the Heater Before switching on the heater for the first time, check it again to be sure it is ful- ly assembled and did not get damaged during wall-mounting or stand assembly. When turning your heater on for the first time it is normal for the heater to emit a ‘new heater’...
Page 12
Operating Instructions (Cont.) Extra Features Temperature memory The heater has a memory function, which will remember the set temperature in case of a power failure. When the power is back on, it will continue operating to the set temperature. (Timer settings are NOT memorised and will need to be reset.) Safety features •...
Other Useful Information CAUTION! Always switch off and disconnect the appliance from the power supply before attempting any maintenance or cleaning the heater. Troubleshooting If your heater fails to operate, or you experience any other problem with the appliance, contact our after sales line for advice or to arrange a service. But before phoning for a service, please ensure that: •...
Page 14
CAUTION! Do not attempt to open the heater and repair it yourself. Any repairs must be carried out by a qualified technician. Technical Specifications Model No JCPH-2000 Rated Power 1700 – 2000W Rated Voltage 220-240V 50-60Hz...
Page 15
After Sales Support (AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org...
Page 16
Warranty returns Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on (AU) 1300 886 649 or (NZ) 0800 836 761 before returning it to the store for a refund.
Need help?
Do you have a question about the JCPH-2000 and is the answer not in the manual?
Questions and answers