Subscribe to Our Youtube Channel
Related Manuals for Euromatic MCH-2400
Summary of Contents for Euromatic MCH-2400
- Page 1 2400W Micathermic Heater INSTRUCTION MANUAL MODEL: MCH-2400 AFTER SALES SUPPORT (AU) 1300 886 649 (NZ) 0800 836 761...
-
Page 2: Table Of Contents
Contents Important Safety Instructions Product Overview Getting Started Operating Instructions Other Useful Information After Sales Support (AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org... -
Page 3: Important Safety Instructions
Important Safety Instructions Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Make sure you understand all instructions and warnings. - Page 4 Important Safety Instructions (Cont.) • After use: Always disconnect power when the heater is not in use and before cleaning, servicing or moving the heater. To disconnect the heater, switch it off and remove the plug from outlet. When disconnecting, grip the plug, do not pull on the cord.
- Page 5 Important Safety Instructions (Cont.) • Children: Supervise children to ensure they do not play with the heater. Close supervision is necessary when any appliance is used by or near children. • Unattended: Do not leave the appliance unattended while it is in use. •...
-
Page 6: Product Overview
Product Overview Parts of the Heater Top Air Outlet Safety Grille Micathermic Heating Elements (5) Digital LED Display Control Panel Wrap Around Cord Storage Power Switch [ I / O ] (at the back, not visible here) Power Cord and Plug (not visible here) Castor Wheel Assemblies (supplied separately in the carton) After Sales Support (AU) 1300 886 649 (NZ) 0800 836 761 |... - Page 7 Product Overview (Cont.) Control Panel Remote Control Remote and Control Panel Buttons and Indicators 10 [ - / + ] Buttons 11 Temperature Button 12 Timer Button 13 ON/OFF Button Installation hardware (not shown) 4x Small Screws (for castor wheel assembly) NOTE: Due to continued product improvement, images and illustrations in this manual may vary slightly from the product purchased.
-
Page 8: Getting Started
Getting Started Unpacking • Carton: This product has been packaged to protect it against transportation damage. Unpack the appliance and keep the original packaging carton and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use. - Page 9 Getting Started (Cont.) Castor Wheel Assembly The heater comes packaged with the castor wheel assemblies detached. Each castor wheel assembly consists of a moulded stand foot and two castor wheels. Before you can use the heater you must attach the wheel assemblies following the instructions below.
-
Page 10: Operating Instructions
Operating Instructions Using the Heater Before switching on the heater for the first time, check it again to be sure the castor wheel assemblies are securely attached. When turning your heater on for the first time it is normal for the heater to emit a ‘new heater’... - Page 11 Operating Instructions (Cont.) Thermostat control • To set the thermostat, press the TEMPERATURE button, then press the [ - ] or [ + ] buttons to set the target temperature (within the 5°C to 36°C range). • On the LED display, the target temperature will start flashing for 5 seconds before it will show the room temperature again.
-
Page 12: Other Useful Information
Other Useful Information CAUTION! Always switch off and disconnect the appliance from the power supply before attempting any maintenance or cleaning the heater. Troubleshooting If your heater fails to operate, or you experience any other problem with the appliance, contact our after sales line for advice or to arrange a service. But before phoning for a service, please ensure that: •... - Page 13 Other Useful Information (Cont.) Operating Instructions (Cont.) Battery Replacement Battery replacement If the battery in the remote control is flat, insert a new 3V CR2025 size button If the battery in the remote control is flat, insert a new 3V CR2025 size button cell following the instructions below.
- Page 14 CAUTION! Do not attempt to open the heater and repair it yourself. Any repairs must be carried out by a qualified technician. Technical Specifications Model No MCH-2400 Rated Power 2200 – 2400W Rated Voltage 220-240V 50-60Hz...
- Page 15 After Sales Support (AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org...
- Page 16 Warranty returns Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on (AU) 1300 886 649 or (NZ) 0800 836 761 before returning it to the store for a refund.
Need help?
Do you have a question about the MCH-2400 and is the answer not in the manual?
Questions and answers