Preset Function; Software Update; Restoring Factory Settings - Brionvega RADIOCUBO.IT TS525 Manual

11

Preset Function

The TS525 Radio Brionvega Collection is equipped with a Preset function which
enables the storage and rapid recall of up to 8 radio frequencies for each of the three
FM, DAB/DAB+ and Internet Radio reception modes.
Storing a station:
After having tuned to the desired station press and hold down the PRESET button
until the list of stored stations appears.
Using the Menu/Select knob choose the desired storage position.
Confirm your choice by pressing on the Menu/Select knob.
The station will then be stored.
Recalling a stored station:
After having turned the system on and having chosen the desired radio mode (FM,
DAB/DAB+ or Internet Radio) briefly press the Preset button.
Using the Menu/Select knob choose the stored station that you wish to recall.
Confirm your choice by pressing on the Menu/Select knob.

12 Software update

Periodically, a software update may be released for your Brionvega Collection TS525.
You can manually search for updates or enable the automatic check function.
If updates are available, the user will be asked if the new software should be installed.
After installation, the previously set user preferences are automatically restored.
Attention:
before starting the
dio is connected to the electrical mains and is not battery powered.
a loss of power during the software update could damage the radio perma-
nently.
To enable the automatic update function, select:
Menu > System config. > Software update >
Automatic update control
13

Restoring factory settings

You can reset the radio's factory settings and delete all the user set preferences.
The software version, if previously updated, will remain the same.
update procedure,
16
make sure that the ra-