Fm Radio Function - Brionvega RADIOCUBO.IT TS525 Manual

7 FM radio function

Your Brionvega Collection TS525 radio is able to receive FM radio signals and display
the RDS information for the tuned station.
To access the FM Radio function, press the MODE button until FM Radio appears
on the display, or select Menu > Main Menu > FM Radio.
7.1 Station search
Using the Menu/Select knob or the |<< and>>| keys on the remote control, you can
change radio frequencies.
Using the remote control, by pressing down on the |<< and >>| keys for 2 seconds,
the search will automatically stop on radio frequencies with the best signal.
7.2 Information about the current playback
The name of the radio station and the RDS information transferred to the radio in
real time are displayed. If no information is available, only the frequency is displayed.
A specific icon at the top of the screen will indicate if the radio transmission is in
stereo mode.
Using the Info key on the remote control, you can obtain additional information about
the current playback, which differs depending on the RDS information transmitted by
the radio.
7.3 Settings
7.3.1 Search settings
The scanning of FM frequencies will stop automatically at each radio signal, even
those with a poor quality.
If you only want to tune strong frequencies, activate the relative function in the Search
settings menu.
7.3.2 Audio settings
You can select to play stereo stations with low signals in mono audio mode. If neces-
sary, you can activate the relative function from the Audio Settings menu.
8 iPod-iPhone function
Your Brionvega Collection TS525 radio is equipped with an iPod/iPhone compatible
docking station. When on the docking station, the iPod/iPhone will be automatically
13