Automatic Installation - Brionvega RADIOCUBO.IT TS525 Manual

3 Starting up the Brionvega Collection TS525 radio
Although the Brionvega Collection TS525 radio has many technically advanced func-
tions, its start-up and initial settings are very simple.
To use the DAB, DAB + or FM radio function, connection to an 100-240 v electric
socket is required.
For the Music Player function, a mass storage memory containing the music tracks
must be connected to the USB port located on the rear radio panel, or an Ethernet of
WiFi connection to a network with an active UPnP compatible music server, such as
the Windows Media PlayerTM or many smartphones. For modes that use informa-
tion originating from the internet, an Ethernet or Wifi network connection is required.
1. Connect the power supply cable;
Pull out the antenna (if you want to receive a DAB, DAB + or FM radio signal);
2. Press the on button on the radio or remote control;
3.1

Automatic installation

When the Brionvega Collection TS525 radio is turned on for the first time, a simple
automatic procedure is started for setting the current date and time and for the initial
network connection settings.
Once the automatic installation procedure is complete, the Brionvega Collection
TS525 radio is ready to be used.
Note:
To repeat the automatic installation
select:
Menu > System configuration > Automatic instal-
lation
Press Yes to start the automatic installation procedure.
Note:
If an Ethernet connection is used, skip the automatic
Setup. If the power supply is disconnected during
the automatic installation, the procedure will be
automatically activated the next time the radio is turned
on.
5