Alarm Clock Function; Sleep Function - Brionvega RADIOCUBO.IT TS525 Manual

10.1

Alarm clock function

To access the alarm clock page, press the Alarm button from the front radio panel,
or press the Alarm key on the remote control or access the menu using the Menu/
Select selection and confirmation knob, access the main menu and then the Alarm
clock menu.
Select the alarm you want to change using the Menu/Select selection and confirma-
tion knob and then set the alarm clock.
The available parameters are:
Enable: ON-OFF and relative alarm frequency settings.
Time: 10.00
Mode: audio source that must be played as the alarm signal.
Volume: 12
Save: to save the settings
The active alarms are indicated by a specific icon to the bottom left of the radio dis-
play.
When the alarm goes off, it can be turned off temporarily using the Snooze function,
which is activated by touching the upper part of the radio, near the handle. Always by
touching the upper part of the radio, near the handle, it will be possible to increase or
decrease the Snooze time.
10.1

Sleep function

The sleep function is used to set the automatic shut-off of the Brionvega ts525 after
an adjustable interval of time.
To set the time for the Sleep function, go to the main menu and select the Sleep func-
tion using the selection and confirm knob Menu/Select.
The following time intervals are available:
Sleep OFF, 15 minutes, 30 minutes, 45 minutes, 60 minutes.
Once the desired time is selected, the system returns automatically to the main
menu. Pressing the Snooze button during audio playback activates the MUTE func-
tion. Simple press the Snooze key again to reactivate the audio volume.
15