Troubleshooting - Samsung VP-D964Wi Owner's Instruction Manual

ENGLISH

Troubleshooting

Troubleshooting
✤ Before contacting a Samsung authorized service centre, perform the
following simple checks.
They may save you the time and expense of an unnecessary call.
Self Diagnosis Display
Display Blinking Informs that...
slow The Battery pack is almost discharged. Change to a charged one.
When the remaining time on the
Tape end! slow
tape is about 2 minutes.
Tape end!
no
The tape reached its end.
No Tape! There is no tape in Camcorder.
slow
Protection! slow
The tape is protected from recording.
slow The Camcorder has some
....D
mechanical fault.
L
C
R
Moisture condensation has formed
slow
in the Camcorder.
Moisture Condensation
I
If the Camcorder is brought directly from a cold place to a warm
place, moisture may condense inside the Camcorder,
on the surface of the tape, or on the lens. In this condition, the tape
may stick to the head drum and be damaged or the unit may not
operate correctly.
To prevent possible damage under these circumstances, the
Camcorder is fitted with a moisture sensor.
I
If there is moisture inside the Camcorder,
this happens, none of the functions except cassette ejection will
work.
Open the cassette compartment and remove the Battery.
Leave the Camcorder for at least two hours in a dry warm room.
✤
Action
Prepare a new one.
Change to a new one.
Insert a tape.
If you want to record,
release the protection.
1. Eject the tape.
....D
2. Set to OFF.
3. Detach the battery.
4. Reattach the battery.
* If unresolved contact your local
Samsung service centre.
see below.
I
I
(DEW) is displayed. If
...
L
C
R
99 99