Setting The File Number - Samsung VP-D964Wi Owner's Instruction Manual

ENGLISH
Digital Still Camera Mode

Setting the File Number

✤ File Number setting works only in <M.Cam> mode. ➥page 19
✤ File Numbers are given to images in the order they were recorded
when they are stored on the Memory Card.
✤ File numbers may be set as follows:
- <Series> : When there are existing files, the new image will be
named as the next number in the sequence.
- <Reset> : When there are no files stored on the Memory Card,
the file numbering starts from 0001.
1. Set the [Power] switch to the [CAMERA].
2. Set the [Mode] switch to [MEMORY].
3. Press the [MENU] button.
I
The menu list will appear.
4. Move the [Zoom] lever up or down to select
<Memory>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select
<File No.>, then press the [OK] button.
6. Move the [Zoom] lever up or down to select desired
option <Series> or <Reset>, then press the [OK]
button.
7. To exit, press the [MENU] button.
72 72
✤
➥
✤
✤
4
M.Cam Mode
√Memory
√Memory Card
Memory Type
√Super Fine
Photo Quality
√1152x864
Photo Size
√Series
File No.
ZOOM Move OK Select MENU
6
M.Cam Mode
Back
Memory Type
Photo Quality
Photo Size
File No.
Series
Reset
ZOOM Move OK Select MENU
I
Exit
Exit