Playback; Playing Back A Tape On The Lcd Screen - Samsung VP-D964Wi Owner's Instruction Manual

ENGLISH

Playback

Playing Back a Tape on the LCD Screen

✤ The Playback function and speaker works only in <Player> mode. ➥page 19
✤ You can monitor the playback picture on the LCD Screen.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Insert the tape you wish to view. ➥page 32
4. Open the LCD Screen.
I
Adjust the angle of the LCD Screen and set the
brightness or colour if necessary.
5. Press the [œ œ œ œ (REW)] button to rewind the tape to the
starting point.
I
To stop rewinding, press the [I (STOP)] button.
I
The Camcorder stops automatically after rewinding is
complete.
6. Press the [√ √ / ❙❙
(PLAY/STILL)] button to start playback.
I
You can view the picture you recorded on the LCD
Screen.
I
To stop the play operation, press the [I (STOP)]
button.
Adjusting the LCD Bright/LCD Colour during
Playback
✤ You can adjust the LCD Bright/LCD Colour during
playback.
✤ The adjustment method is the same procedure as used
in <Camera> mode. ➥page 29
Adjusting the Volume
✤ When you use the LCD Screen for playback, you can
hear recorded sound from the built-in Speaker.
- Take the following steps to lower the volume or mute
the sound while playing a tape on the Camcorder.
✤ When you hear sounds once the tape is in play, use the
[Zoom] lever to adjust the volume.
I
A volume level display will appear on the LCD Screen.
I
Levels may be adjusted from anywhere between
<00> to <19>.
I
If you close the LCD Screen while playing, you will
not hear sound from the speaker.
✤ When the Multi cable is connected to the Camcorder, you
cannot hear sound from the Built-In Speaker and cannot adjust the
volume.
✤ Volume control is disabled while PB Zoom is in use.
✤
✤
5 6
M E N U
Q U
I C K
M E
N U
√ 0:46:00:11
SP
60min
[05]
† ...
✤
✤
➥
I
œ œ œ œ
I
I
√ √ /II
I
I
✤
✤
➥
✤
✤
I
I
I
➥
I
I
57 57