Setting The Av In/Out (Vp-D963I/D964Wi/D965Wi Only) - Samsung VP-D964Wi Owner's Instruction Manual

ENGLISH
Playback

Setting the AV In/Out (VP-D963i/D964Wi/D965Wi only)

✤ AV In/Out function works only in <Player> mode. ➥page 19
✤ AV In/Out setting enables you to record signal from external sources and
display it on LCD Screen. Also, you can direct your video or image to
external devices to record or play back.
1. Connect the Camcorder to your VCR or TV with the Multi
Cable. ➥pages 63~64
2. Set the [Power] switch to [PLAYER].
3. Set the [Mode] switch to [TAPE].
4. Turn on the VCR or TV.
5. Insert the blank tape with protection tab closed into the
Camcorder.
I
If you want to record from a connected VCR, insert a
recorded VHS tape into the VCR.
6. Press the [MENU] button.
I
The menu list will appear.
7. Move the [Zoom] lever up or down to select
<Record>, then press the [OK] button.
8. Move the [Zoom] lever up or down to select
<AV In/Out>, then press the [OK] button.
9. Move the [Zoom] lever up or down to select <AV In>,
<S-Video In> then press the [OK] button.
I
If you want to see the Camcorder picture with a TV,
set <AV In/Out> menu to <Out>.
10.To exit, press the [MENU] button.
11. Press the [Start/Stop] button to set the Camcorder to
REC PAUSE mode.
I
PAUSE appears.
12.Select the TV programme or playback the VHS
tape.
13.Press the [Start/Stop] button to start recording.
I
If you want to pause recording for a while, press
the [Start/Stop] button again.
14.To stop recording, press the [I (STOP)] button.
[ Notes ]
I
When you record the images being played back on an
analog VCR, if they are not being played back at normal
speed, (for example, more than double speed or slow
playback), only a gray image appears on the Camcorder.
I
If <AV In / Out> is set to <AV In> or <S-Video In>, the WindCut Plus will be
released.
66 66
✤
✤
2
7
Player Mode
√Record
√SP
Rec Mode
√12Bit
Audio Mode
√Off
WindCut Plus
√Out
AV In/Out
ZOOM Move OK Select MENU
9
Player Mode
Back
Rec Mode
Audio Mode
WindCut Plus
AV In/Out
Out
AV In
S-Video In
ZOOM Move OK Select MENU
➥
I
I
I
Exit
I
I
I
Exit
I
➥
I