Functional Description - Makita CA5000 Instruction Manual

5.
6.
dangerous and can lead to serious accidents.
7.
tion and skin contact. Follow material supplier
safety data.
8.
9.
10.
ual. Use of an incorrectly sized blade may affect
the proper guarding of the blade or guard opera-
11.
pitch hardened on blades slows saw and
increases potential for kickback. Keep blade clean
gum and pitch remover, hot water or kerosene.
Never use gasoline.
12.
13.
14.
15.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity
serious personal injury.
-
-
Gum and wood
6 ENGLISH
FUNCTIONAL
DESCRIPTION
CAUTION:
By turning the quick stop, you can choose the appro-
priate depth of groove cutting for 3, 4, or 6 mm board
thickness swiftly.
The number, seen from the handle side, indicates the
workpiece board thickness.
1
2
Quick stop 2.
0 mm depth is set properly when the tool is shipped
from the factory, but if you changed the depth of groove
Turn the quick stop to 0 mm.
2.
3. Make sure that the blade does not make any
contact with work piece.
button, and turn the tool on.
5. Slowly press down the saw head fully, and check
whether the groove cutter blade does not contacts but
almost touches the workpiece. If not, stop the tool and
wait until the groove cutter blade stops completely, and
again.