Samsung VP-D451(i) Owner's Instruction Manual page 79

IEEE1394 Data Transfer
System Requirements
I CPU: faster Intel ® Pentium III™ 450MHz compatible.
I Operating system: Windows
Main memory: more than 64 MB RAM
I
I IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV Connection Cable (VP-D451i/D453i/D454i/D455i only)
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE. (VP-D453i/D454i/D455i only)
3. Connect the DV cable (not supplied) from the DV jack of the Camcorder
to the DV jack of the other DV device.
I Make sure that
4. Press the Start/Stop button to begin REC PAUSE mode.
I PAUSE is displayed on the LCD screen.
5. Start playback on the other DV device while you monitor the picture.
6. Press the Start/Stop button to start recording.
If you want to pause recording momentarily, press the Start/Stop button again.
7. To stop recording, press the
[ Notes ]
I When using this Camcorder as a recorder, the pictures that appear on an external monitor may seem distorted, however recorded
pictures will not be affected.
I
Operation is not guaranteed for all the recommended computer environments mentioned above.
I While transmitting data from the Camcorder to PC at strong electric field and strong magnetic field, VIDEO signal or AUDIO signal
may transmit with noise.
® 98SE, ME, XP, Mac OS (9.1~10.2)
is displayed.
(STOP) button.
ENGLISH
DV
USB
AV/ S
79 79