ENGLISH
Playback
Playing back a Tape you have recorded on the LCD Screen
✤
The Playback function works only in Player mode.
✤
You can monitor the playback picture on the LCD screen.
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE. (VP-D453(i)/D454(i)/D455(i) only)
3. Insert the tape you wish to view. (see page 36)
4. Open the LCD screen.
I
Adjust the angle of the LCD screen and set the brightness or colour if necessary.
5. Press the
(REW) button to rewind the tape to the starting point.
I
To stop rewinding, press the
The Camcorder stops automatically after rewinding is complete.
I
6. Press the
(PLAY/STILL) button to start playback.
You can view the picture you recorded on the LCD screen.
I
I
To stop the play operation, press the
Adjusting the LCD Bright/Colour during Playback
✤
You can adjust the LCD Bright/Colour during playback.
✤
The adjustment method is the same procedure as used in Camera mode. (see page 32)
[ Notes ]
I
You can also view the picture on a TV screen, after connecting the Camcorder to a TV or VCR. (see pages 70~71)
I
Various functions are available in Player mode. (see page 72)
I
For searching and viewing still images recorded onto tape. (see page 67)
68
68
(STOP) button.
(STOP) button.
1
3
5