Photo Image Recording; Searching For A Photo Picture - Samsung VP-D200(i) Owner's Instruction Book

ENGLISH
Advanced Recording

PHOTO Image Recording

1. Press the PHOTO button and hold it.
The still picture appears on the LCD monitor.
If you do not wish to record, release the button.
2. Reless the PHOTO button and press the PHOTO button again in 2 seconds.
The still picture is recorded for about 6~7 seconds.
3. After the PHOTO has been recorded, the camcorder returns to STBY mode.

Searching for a PHOTO picture

The PHOTO SEARCH works in PLAYER mode only.
1. Press the MENU button.
The MENU list will appear.
2. Move the MENU SELECTOR to highlight A/V.
3. Push the MENU SELECTOR to enter the sub-menu.
4. Select PHOTO SEARCH from the sub-menu and push the MENU SELECTOR.
Or press the PHOTO SEARCH button on the remote control. (VP-D230(i)/250(i)/270(i) only)
5. Search the PHOTO using the
The PHOTO search process appears on the LCD while you are searching.
After completing the search, the camcorder displays the still image.
6. To exit, press the
66 66
(FF) and (REW) buttons.
(STOP) button.
PHOTO
PLAYER MODE
INITIAL
CAMERA
A/V REC MODE
MEMORY PHOTO SEARCH
VIEWER COPY
AUDIO MODE 12
AUDIO SELECT
WIND CUT
PB DSE
OUT
AV IN/OUT
PLAYER MODE
A / V SET
REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE 12
SOUND[1]
AUDIO SELECT
WIND CUT
PB DSE
OUT
AV IN/OUT