Basic Recording; Making Your First Recording - Samsung VP-D200(i) Owner's Instruction Book

ENGLISH

Basic Recording

Making your First Recording

1. Connect a Power source to the camcorder.
(see page 23)
(A battery pack or a AC power adapter)
Insert a cassette. (see page 27)
2. Remove the LENS CAP.
3. Set the power switch to the CAM position.
Open the LCD monitor.
Set the mode switch to the TAPE position.
(VP-D230(i)/D250(i)/D270(i) only)
Make sure that STBY is displayed.
If the protection tab of the cassette is open,
STOP and PROTECTION! will be displayed.
Make sure the image you want to record
appears in the LCD monitor or viewfinder.
Make sure the battery level indicates that there
is enough remaining power for your expected
recording time.
4. To start recording, press the START/STOP button.
REC is displayed in the LCD.
To stop recording, press the START/STOP
button again.
STBY is displayed in the LCD.
28 28
1
4
FADE
S.SHOW
2
3