Using The Lcd Enhancer; Preparation - Samsung VP VP-HMX10 User Manual

preparation

USING THE DISPLAY (
Switching the information display mode
You can switch between the on-screen information display modes:
Press the Display ( )/iCHECK button.
The full and minimum display modes will alternate.
• Full display mode: All information will appear.
• Minimum display mode: Only operating status indicators will appear.
If the HD camcorder has warning information, a warning message will appear.
Checking the remaining battery and recording capacity
• When the power is on, press and hold the Display (
• When the power is off, press the Display (
• After a while, the battery time and approximate recordable time according to the
storage and quality appear for about 10 seconds. If a storage media is not inserted,
its icon does not appear.
Display ( )/iCHECK button does not work in the menu or quick menu screen.

USING THE LCD ENHANCER (

Contrast is enhanced for a clear and bright image. This effect is also implemented
outdoors in bright daylight.
1. Press the LCD enhancer (
• The ( ) indicator is displayed.
2. To exit LCD enhancer, press the LCD enhancer (
• LCD enhancer function does not affect the quality of the image being recorded.
• When LCD enhancer works at the low illumination, some stripes may occur on
the LCD screen. It is not a malfunction.
22_ English
)/iCHECK BUTTON
)/iCHECK button.
)
) button.
) button again.
)/iCHECK button.
Remaining battery (approx.)
Battery
0% 50% 100%
80 Min
Memory (Super Fine)
044 Min 022 Min
Recordable memory capacity (approx.) Recordable memory capacity (approx.)
80
STBY 00:00:00 [44Min]
Min