Overheating Protection - Miele KM 6328-1 Operating And Installation Instructions

Safety features

Overheating protection

All the induction coils and cooling ele-
ments for the electronics are fitted with
an overheating protection mechanism.
Before the induction coils or cooling
elements get too hot, the overheating
protection mechanism cuts in in one of
the following ways:
– any booster function in operation will
be switched off.
– the set power level will be reduced.
– the cooking zone will switch off auto-
matically.  will flash in the display.
38
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
The overheating protection mechanism
can be triggered by:
– heating up an empty pan.
– fat or oil being heated on a high
power level.
– insufficient ventilation to the under-
side of the hob.
– a hot cooking zone being switched
on after an interruption to the power
supply.
If, despite removing the cause, the
overheating protection mechanism trig-
gers again, contact Miele Service.