System Requirements; Recording With A Dv Connection Cable (Vp-D130I/D190I Only) - Samsung VP D 130 Owner's Manual

ENGLISH
IEEE 1394 Data Transfer

System requirements

CPU : faster Intel ® Pentium III TM
Operating system : Windows ® 98SE, ME, XP, Mac OS
Main memory : more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card

Recording with a DV connection cable (VP-D130i/D190i only)

1. Set the power switch to VCR mode.
2. Connect the DV cable (not supplied) from the DV IN/OUT port of
the camcorder to the DV IN/OUT port of the other DV device.
Make sure that DV IN appears on the screen.
3. Press the START/STOP button to begin REC PAUSE mode.
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
If you want to pause recording momentarily, press the START/STOP button again.
6. To stop recording, press the (STOP) button.
Reference
When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures are not affected.
72
450Mhz compatible.