Inserting And Ejecting The Smartmediacard; Inserting The Card; Ejecting The Card - Samsung VP D 130 Owner's Manual

ENGLISH
Digital Still Camera mode (VP-D190/D190i only)

Inserting and ejecting the SmartMediaCard

Inserting the card

1. Turn the Power switch to OFF.
2. Insert the SmartMediaCard into the CARD slot located beneath the camcorder,
in the direction of the arrow.

Ejecting the card

1. Turn the Power switch to OFF.
2. Slide down the Card Eject switch and pull out the card.
Reference
If you turn the power switch to M.PLAY, the last recorded image appears.
- If there are no recorded images on the SmartMediaCard, NO STORED IMAGE!
and will display on the screen.
Do not turn the power off while recording, loading, erasing or formatting.
Please turn the power off before you insert or eject the SmartMediaCard.
You could lose data on the SmartMediaCard.
Do not allow metal substances to come in contact with the terminals of the Card.
Do not bend the Card.
After pulling the card out from the camcorder, please keep the SmartMediaCard in
a soft case to prevent static shock.
The stored contents may be changed or lost as a result of misuse, static electricity,
electric noise or repair. Save important images separately.
Samsung is not responsible for data loss due to misuse.
If the USB cable is connected to the camcorder, the
(REW) buttons are not available in M.PLAY mode.
78
(DELETE), (S.SHOW), (FWD),