Date/Time - Samsung VP D 130 Owner's Manual

ENGLISH
Advanced Recording

DATE/TIME

The DATE/TIME function works in CAM, VCR, M.REC and M.PLAY modes.
The date and time are automatically recorded on a special data area of the tape.
You can choose to display - the OFF, DATE, TIME, DATE/TIME
OFF only
DATE only
TIME only
DATE & TIME
1. Press the MENU button.
The menu list will appear.
2. Turn the MENU DIAL to highlight VIEWER and push the MENU DIAL.
3. Turn the MENU DIAL to highlight DATE/TIME.
4. Push the MENU DIAL to select the sub-menu.
5. Using the MENU DIAL, select the DATE/TIME mode.
To return to the previous menu, place the cur- sor on the return icon
located at the lower part of the menu and Push the MENU DIAL.
6. To exit, press the MENU button.
Reference
The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.
The DATE/TIME will read "- - -" in the following conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the Camera's memory.
- When the battery becomes weak or dead.
52
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
DATE / TIME
DATE
TIME
DATE&TIME