Demonstration - Samsung VP D 130 Owner's Manual

Advanced Recording

DEMONSTRATION

Demonstration automatically shows you the major functions that are included with
your camcorder so that you may use them more easily.
The DEMONSTRATION function may only be used in the CAM mode without a tape
inserted in the camcorder.
The demonstration operates repeatedly until the DEMONSTRATION mode switched
OFF.
1. Set the camcorder to CAM mode.
2. Press the MENU button.
The menu list will appear.
3. Turn the MENU DIAL to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and push the MENU DIAL.
5. To activate the DEMONSTRATION set DEMONSTRATION ON.
Press the menu button to quit the menu.
The demonstration will begin.
6. To end the DEMONSTRATION, set the DEMONSTRATION to OFF.
Reference
The DEMONSTRATION function only works without a TAPE installed.
The DEMONSTRATION mode is automatically activated when the camcorder is left idle
for more than 10 minutes after switc- hing to the CAM mode (no tape is inserted in the
camcorder).
If you press other keys (FADE, BLC, PHOTO, EASY, CUSTOM) during the
DEMONSTRATION mode, the DEMONSTRATION stops temporarily and the
demonstration resume if you do not operate any other functions within 10 minutes.
ENGLISH
CAM MODE
INITIAL CLOCK SET
CAMERA REMOCON
A/V BEEP SOUND
MEMORY SHUT SOUND
VIEWER DEMO
CAM MODE
INITIAL SET
CLOCK SET
REMOCON
BEEP SOUND
SHUTTER SOUND
DEMONSTRATION
39