Table of Contents
Advertisement
Date/Time Display
You can set the date and time to display on the LCD screen.
• Before you use the "Date/TimeDisplay" function, you must set the date and time. ➥page 34
settings
Off
Current date and time information is not displayed.
Date
Displays the current date.
Time
Displays the current time.
Date&Time
Displays the current date and time.
The date/time will read "JAN/01/200912:00AM" in the following conditions:
•
- The built-in rechargeable battery becomes weak or dead.
•
This function depends on the"DateType" and"TimeType"setting.
LCD Brightness
You can adjust the brightness of the LCD screen to compensate for ambient lighting
•
conditions.
Pressing the Controlbutton ( ) will brighten the screen whereas pressing the Control
•
button ( ) will darken the screen.
A brighter LCD screen setting consumes more battery power.
•
If you adjust the LCD brightness when the ambient lighting is too bright, it is hard
•
to see the monitor indoors.
The LCD Brightness feature does not affect the brightness of images to be stored.
•
You can adjust the LCD Brightness from -15 to 15.
•
LCD Color
You can change the color impression of the screen with a variety of color options by
•
adjusting the red and blue color range.
When you set red and blue color range, the higher the fi gures, the brighter the LCD
•
screen will be.
You can adjust the LCD color (red/blue) from -15 to 15, using the Control button
•
( / / / / OK).
•
You can manipulate the color displayed on the LCD screen by adjusting the color ratio
of red and blue.
Adjusting the color display of LCD screen does not affect the image to be recorded.
•
Higher the value will produce brighter LCD screen when adjusting color range of red and blue.
•
contents
on-screendisplay
None
JAN/01/2009
12:00AM
JAN/01/200912:00AM
STBY
0:00:00 [475Min]
9999
LCD Brightness
0
Exit
Adjust
OK
STBY
0:00:00 [475Min]
9999
LCD Color
Red
0
Blue
0
Exit
Move
OK
English_89
Advertisement
Table of Contents
