troubleshooting
Adjusting the image during recording
Symptom
Focus does not adjust
automatically.
The image appears too bright or
flickering, or changes in colour.
122_English
Set "Focus" to "Auto."
•
The recording conditions are not suitable for auto focus.
•
Adjust the focus manually.
The lens is dusty on the surface. Clear the lens and check the focus.
•
•
Recording is being made in a dark place. Increase the brightness in the place.
This occurs when recording images under a fluorescent lamp, sodium lamp, or
•
mercury lamp. Cancel "iSCENE" to minimise these phenomena.
Explanation/Solution
page 62
page 62
page 57