Symptoms And Solutions - Samsung SMX-C10FP User Manual

If you encounter any problems using your camcorder, check the followings before asking for service
repair. If these instructions do not solve your problem, contact the nearest Samsung authorised service
centre.

Symptoms and solutions

Power
Symptom
The camcorder does not turn on.
The power automatically turns
off.
Power cannot be turned off .
The battery pack is quickly
discharged.
• The battery pack may not be installed on your camcorder.
Insert a battery pack into the camcorder.
The inserted battery pack may be discharged.
•
Charge the battery pack or replace it with a charged one.
If you use an AC power adaptor, make sure it is properly connected to the
•
wall outlet.
Remove the battery pack or unplug the AC power adaptor, and reconnect
•
the power supply to the camcorder before turning it on.
Is "Auto Power Off" set to "5 Min"?
•
If no button is pressed for about 5 minutes, the camcorder is automatically
turned off ("Auto Power Off"). To disable this option, change the setting of
"Auto Power Off" to "Off"
• The battery pack is almost discharged. Charge the battery pack or replace it
with a charged one.
Use the AC power adaptor.
•
Remove the battery pack or unplug the AC power adaptor, and reconnect
•
the power supply to the camcorder before turning it on.
• The temperature in the use condition is too low.
The battery pack is not fully charged. Recharge the battery pack.
•
The battery pack reached the end of its lifespan and cannot be recharged.
•
Use another battery pack.
Explanation/Solution
page 93
English_117