troubleshooting
Recording
Symptom
Pressing the Recording start/
stop button does not start
recording.
The actual recording time is less
than the estimated time.
The recording stops automatically.
When recording a subject
illuminated by bright light, vertical
lines appear.
120_English
There is not enough free space to record on the the storage media.
•
Check if memory card is not inserted or write-protect tab is set to lock.
•
The internal temperature of your camcorder is unusually high.
•
Turn off your camcorder and leave it for a while in a cool place.
Your camcorder is damp and moist inside (condensation).
•
Turn off your camcorder and leave it for about 1 hour in a cool place.
•
The estimated recording time may vary depending on contents and features
used.
Recording a fast-moving subject increases the bit rate and consequently
•
the amount of storage space required for the recording, which can lead to a
shorter available recording time.
There is no more free space for recording on the storage media.
•
Back up important files on your PC and format the storage media or delete
the unnecessary files.
If you frequently record or delete files, the performance of the built-in flash
•
memory will deteriorate. In this case, reformat the built-in memory.
If you use the memory card with low writing speed, the camcorder
•
automatically stops recording the videos and the corresponding message
appears on the LCD screen.
The camcorder is unable to record these levels of brightness.
•
Explanation/Solution