AKCP IO-digital8 User Manual page 9

IO-Digital8 User Manual
5c. Notification Control and Cycle Time
If you select "Notification control" from the options shown in fig 5b, you will then need to set your
notification options. Here you can chose from either Low or high, or you can chose to cycle your
notification.
If you choose to cycle your notification, you can set the time in the option below:-
6. Normal State
Here you can select between an open circuit (+5 Volts) or a closed circuit (GND).
7. Enable Graph
This option allows you to enable your graphing data. To access your graph, click "click here to view
graph"
This will display the page shown below which contains all your graphing data.
Provided by official AKCP-Distributor Didactum https://www.didactum-security.com/en/
9