Connecting A Power Source; To Use The Ac Power Adapter And Dc Cable; To Select The Camcorder Mode - Samsung SCD903 Owner's Instruction Manual

Preparation

Connecting a Power Source

There are two types of power source that can be connected to your camcorder.
- The AC Power Adapter and AC cord : used for indoor recording.
- The Battery Pack : used for outdoor recording.

To use the AC Power adapter and DC Cable

1. Connect the AC Power adapter to the AC cord.
2. Connect the AC cord to a wall socket.
Notes
I
You must use the AA-E8 type AC Power adapter.
I
The plug and wall socket type may differ according to
your resident country.
3. Connect the DC cable to the DC jack socket of the
camcorder.
4. Set the camcorder to the desired mode by holding down the
tab on the power switch and turning it to the CAMERA or
PLAYER mode.

To select the CAMCORDER mode

✤ If you want to use this unit as a camcorder, set the mode switch to TAPE position.
✤ If you want to use this unit as a DSC (Digital Still Camera), set the mode switch to
MEMORY STICK position.
Power Switch
< CAMERA mode >
ENGLISH
< PLAYER mode >
23 23