Adjusting The Lcd During Play; Controlling Sound From The Speaker - Samsung SCD903 Owner's Instruction Manual

Basic Recording

Adjusting the LCD during PLAY

✤ You can adjust the LCD during playback.
✤ The adjustment method is the same procedure as used in CAMERA mode. (see page 32)

Controlling Sound from the Speaker

The Speaker works in PLAYER mode only.
I
When you use the LCD screen for playback, you can hear recorded sound from the built-in
Speaker.
- Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.
1. Set the power switch to PLAYER mode.
2. Press (PLAY/STILL) to play the tape.
3. When you hear sounds once the tape is in play, use the MENU SELECTOR to adjust the
volume.
I
A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between 00 to 19.
I
If you close the LCD while playing, you will not hear sound from the speaker.
Note
I
When the cable is connected to the Audio/Video jack, you cannot hear sound from the speaker
and cannot adjust the volume.
ENGLISH
2
3-1
<3-2>
0 : 2 3 : 4 7
5 5 min
VOL. [ 1 1 ]
1 0 : 0 0 A M
J A N . 10 , 2 0 0 4
35 35