ENGLISH
Advanced Recording
FLASH SELECT (SCD87 only)
The Flash Select function works in CAMERA or M.REC mode only, when the Flash Light (not supplied) is connected to
SmartShoe.
1. Install the Flash Light (optional accessory) on SmartShoe.
2. Press the MENU button.
The menu list will appear.
3. Turn the MENU DIAL to highlight CAMERA and press the ENTER button.
4. Select FLASH SELECT from the submenu.
5. Press the ENTER button to select the Flash mode.
(Flash auto): The flash comes on depending on the brightness of the subject.
(Flash ON): The flash comes on with every shot.
6. If you don't want to use the Flash light, set the Flash switch (on the Flash Light) to OFF.
50
50
CAM MODE
INITIAL
CAMERA
PROGRAM AE
A/V
WHT. BALANCE
MEMORY
D.ZOOM
VIEWER
EIS
DSE SELECT
FLASH SELECT
CUSTOM