Delayed Recording - Self Timer - Samsung SCD6040 Owner's Instruction Book

The Camera : Basic Picture Taking
Delayed Recording – Self Timer
✤
Using the remote control, delaying the shutter release (in order to take self-photography and
various other camera uses) is available.
1. Turn your camera on by setting the Power Switch to
2. Turn the Mode Dial to set
3. Press the MENU button.
The top menu including
4. Press the LEFT or RIGHT button to select
The available options of OFF, 2s SELF and 10s SELF are listed.
5. Select an option by pressing the DOWN or UP button, then press the OK or MENU button.
The selected option is applied and the corresponding indicator appears on the LCD monitor.
You can also set the SELF TIMER by pressing the SELF TIMER button on the Remote Control
until the desired option is displayed on the LCD monitor.
2S
: Delays the shutter release by 2 seconds.
: Delays the shutter release by 10 seconds.
6. Frame your subject.
7. Press the PHOTO button on the Remote Control or on the Camera to start the timer. For motion
clips, press the START/STOP button on the Remote Control or on the Camera.
A beep sound will play and after the time indicated, recording starts.
Notes
✤
Do not obstruct the remote control sensor by putting obstacles between the remote control and
camera.
✤
The remote control range is 4 ~ 5m (13 ~ 17 ft).
✤
The effective remote control angle is up to 30 degrees left / right from the center line.
✤
Using a tripod is recommended for delayed recording.
(PROGRAM), A, S, M, SCENE or
(SELF TIMER) is displayed.
(SELF TIMER), then press the DOWN button.
(CAMERA) mode.
(MOVIE) mode.
ENGLISH
SET
SELF TIMER
OFF
2s SELF
10s SELF
2272
2S
105 105