Connecting To A Tv Which Has No Audio And Video Input Jacks; Playback; A/V - Samsung SC-D353 Owner's Instruction Book

ENGLISH

Playback

Connecting to a TV which has no Audio and Video Input Jacks

✤ You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR with
the Audio/Video cable.
I
The yellow jack: Video
I
The white jack: Audio(L) - Mono
I
The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the Power switch to PLAYER.
4. Set the Mode switch to TAPE.
(SC-D353/D354/D355 only)
5. Turn on both the TV and VCR.
I
Set the input selector on the VCR to
Line.
I
Select the channel reserved for your VCR on the TV set.
6. Play the tape.
Playback
✤ You can play the recorded tape in Player mode.
1. Connect a power source and set the Power switch
to PLAYER.
2. Set the Mode switch to TAPE.
(SC-D353/D354/D355 only)
3. Insert the tape you wish to play back.
4. Using the / (REW/FF) buttons, find the first
position you wish to play back.
5. Press the (PLAY/STILL) button.
I
The images you recorded will appear on the TV after a few
seconds.
I
If a tape reaches its end while being played back, the tape will
rewind automatically.
[ Notes ]
I
The playback mode (SP/LP) is selected automatically.
I
If the VCR has an S-Video input terminal, you may use S-Video for
better quality.
I
The S-Video terminal transmits video only. Connect audio cables
for sound.
I
If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
72 72
✤
Video input-Yellow
S-Video input
VCR
Audio input
(left)-White
Audio input
(right)-Red
TV
Audio/Video
Antenna
S-Video
5.
I
I
I
SP LP
I
I
S-Video (
I

A/V

1. A/V
I
: Video (
I
:Audio (L) [
Camcorder
I
:Audio (R) [
2.
3. PLAYER(
4. Mode
( SC-D353/D354/D355 )
5.
I
I
6.
✤
Player ( )
1. ,
2. TAPE (
Mode
( SC-D353/D354/D355 )
3.
4. (REW( ))
(PLAY/STILL( ))
/
,
,
, S-Video ,
S
)
, :Audio(L) [
A/V
)
]-
]
)
TAPE( )
.
LINE
PLAYER ( )
)
(FF( ))
.
]