Controlling Sound from the Speaker
✤ The Speaker works only in Player mode.
✤ When you use the LCD screen for playback, you can hear
recorded sound from the built-in Speaker.
Take the following steps to lower the volume or mute the sound
while playing a tape on the Camcorder.
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
3. Press the
(PLAY/STILL) to play the tape.
4. When you hear sounds once the tape is in play, use
the Menu selector to adjust the volume.
A volume level display will appear on the LCD
Levels may be adjusted from anywhere between
00 to 19 and you will not hear any sound when
the volume is set on 00.
If you close the LCD screen while playing, you
will not hear sound from the speaker.
[ Notes ]
When the AV cable is connected to the Camcorder,
you cannot hear sound from the Built-In Speaker
and cannot adjust the volume.
The sound will return when you remove the
connected AV cable from the jack of your