Features - Bosch NOM 100 LSN Product Information

Product Information Optical Smoke Detector NOM/NOM K 100 LSN

2. Features

D Detector polling routines and evaluation with transmission of events in the case of:
− Deviation from basic value
− Detector fault due to the risk of false alarms caused by excessive contamination
− Detector exchange requirement (maintenance)
− Pre−alarm (change in functionality)
− Alarm
D Automatic adjustment of thresholds
D Measurement of detector contamination using a separate smoke recording method
D Individual detector identification
D Active sensor technology self−monitoring with relevant evaluation electronics
D Wide sensor check (remote diagnosis)
D Different detector display via a two−color LED
(red = alarm, yellow = fault)
D Activation of a remote external detector alarm display
D Several base versions are available for the detector.
(See PI−34.95b detector base NMS 100).
D Can be connected to the following fire panels:
− BZ 500 LSN
− UEZ 1000 (LSN)
− UEZ 2000LSN
− UGM 2020 (LSN)
− Control units with receiver modules with identical connection properties
D VdS approval number: G 293004
Seite 6 von 30
PI − 34.62c
BDL−F .01U.002.709
A5.en / 29.12.2004
ST−FIR/ PRM1 / deh