Bosch NOM 100 LSN Product Information page 24

Product Information Optical Smoke Detector NOM/NOM K 100 LSN
8.4. Ventilation Duct Detector Base NMS K 100
8.5. Mounting Tips for Detector Bases
When mounting bases, ensure that the LED and the Bosch logo are in the position
indicated by the arrow. Planning guidelines for mounting height, detector distance etc.
must be observed.
NMS 100/NMS 100 V/NMS F 100/NMS F 100 V
Detector bases NMS 100/NMS 100 V/NMS F 100/NMS F 100 V are mounted using
two screws 4mm in diameter 45mm apart.
NMS H 100/NMS H 100 V
The cavity bases are mounted using two adjustable clamps integrated in the base.
NMS K 100
The ventilation duct detector base NMS K 100 is secured to the ventilation duct us-
ing two clamp closures integrated in the mounting base.
Clamp closure
for fastening
on ventilation duct
This dimension can be
increased by extension
using identical
tubes/fitting.
Seite 24 von 30
120
Clamp closure
for fastening
on ventilation duct
Spacer tube
PI − 34.62c
Cable entries
(PG screw connections)
BDL−F .01U.002.709
A5.en / 29.12.2004
ST−FIR/ PRM1 / deh