Section 5 Installation; Location - ESAB EMP 285ic 1ph Instruction Manual

SECTION 5
The installation must be carried out by a professional.
CAUTION
This product is intended for industrial use. In a domestic environment this product may cause
radio interference. It is the user's responsibility to take adequate precautions.
5.1

LOCATION

Position the power source so that its cooling air inlets and outlets are not obstructed.
A
IF PERMANENT
INSTALLATION: LEAVE
ENOUGH ROOM TO OPEN
DOOR AND ACCESS BOBBIN
SIDE.
INSTALLATION
INSTALLATION
Figure 5-1. Minimum Safe Clearances
5-1
A. 6 in. (152 mm)
B. 4 in. (100 mm)
C. 6 in. (152 mm)
B
C