Preparation; How To Use The Remote Control; Battery Installation For The Remote Control; Self Record Using The Remote Control - Samsung SCD 5000 User Manual

ENGLISH

Preparation

How to use the Remote Control

Battery Installation for the Remote Control

You need to insert or replace the lithium battery when :
- You purchase the camcorder.
- The remote control doesn't work.
Make sure that you insert the lithium cell correctly, following the + and - markings.
Be careful not to reverse the polarity of the battery.
Self Timer Recording and Photography Using the Remote Control
When you use the Self Timer function on the remote control, recording begins
automatically in 10 seconds.
1. Set the device to CAMCORDER or CAMERA mode.
2. Press the SELF-TIMER button until the appropriate indicator is displayed in the LCD or
viewfinder.
3. Press the START/STOP button or the PHOTO Button to start the timer.
- After 10 seconds, recording or photography begins.
- Press START/STOP again when you want to stop recording.
24 24
START/STOP F.ADV START/STOP F.ADV
T W T W
PHOTO STILL ZERO MEM. PHOTO STILL ZERO MEM.
REW/RPS PLAY FF/FPS REW/RPS PLAY FF/FPS
A.DUB STOP SELF TIMER A.DUB STOP SELF TIMER
SLOW SLOW
START/STOP F.ADV
T W
Self
PHOTO STILL ZERO MEM.
Timer
REW/RPS PLAY FF/FPS
A.DUB STOP SELF TIMER
SLOW