connection
•
Adjust the sound volume on the TV.
•
The remote control is useful when operating the HD camcorder while viewing an image on a TV screen.
•
Information that the HD camcorder is recording will appear on the TV screen: You can switch between the on-screen
information display modes. Refer to "Switching the information display mode" and press the Display (
to switch the display status. page 22
•
When "TV Display" is set to off, OSD (On-Screen-Display) does not appear on the TV screen. page 78
DUBBING IMAGES FROM THE CAMCORDER TO A VCR OR DVD/HDD RECORDER
• You can dub images played back on this HD camcorder onto a VCR or DVD/HDD recorder.
• Refer to "editing movie images" to create a playlist by selecting desired scenes from those recorded on this HD
camcorder.
page 86
• Use the provided multi-AV cable to connect the HD camcorder to the other AV device.
• If the connected AV device has an S-Video input jack, you can connect the S-Video plug of the Multi-AV cable.
1. Press the MODE button to set Play (
2. Choose the desired image to be dubbed, then press the record button on the connected device.
• The HD camcorder will start playback and the recording device will dub it.
•
Using S-Video will deliver clear images.
•
Be sure to use the AC power adaptor to power the HD
camcorder to prevent battery power from shutting off during
dubbing.
48_ English
).
)/iCHECK button
VCR or DVD/HDD
HD Camcorder
recorder
S-VIDEO IN
Signal flow
Multi-AV cable
VIDEO IN
AUDIO IN
L
R
or