[ENGLISHI
Playing back a Tape
Notes:
•
SCL810/L860/L870feature a monauralaudio system.If your TV or VCR are stereo,
connectthe audio cable to input "ISof yourTV or VCR.
•
Youcan use an S-VIDEOcable to obtain better quality pictures if you have an S-VIDEO connector on yourTV.
•
While playing back on aTV screen,close the LCD panel Otherwise,picture distortion may occur.
1,
Use the TV/VIDEO bufton to select VIDEO on your TV.
2,
Connect power soume (battery or AC Power Adapter) to the camcorder.
Set the power switch to PLAYER mode.
3,
Insert a tape you want to see.
•
Make sure that STOP is displayed.
4. Pressthe INI (PLAY/STILL)button.
•
The picture you recordedappears on the TV after 2 to 3 seconds.
•
Press• (STOP) to stop playing.
•
If the tape reaches its end during playback,
the tape will rewindautomatically.
PLAYER
Notes:
•
Vibration from the built-in speaker can cause picture distortion.
•
It is best to turn the built-in speaker off when your camcorder is connected to the TV.
•
The system (Hi8/Smm) is selected automatically, depending on the tape format.
•
This camcorder does not support LP recording and playback.
,A