Advanced
Recording
[ENGLISH 1
÷
Evena beginner can easily make a recording using the EASY mode.
•
The EASY mode only operates in CAMERA mode,
1. Set the powerswitchto CAMERAmode (see page22),
2. By pressing the EASYbutton, all the functions of the camera willbe
set to off and the recording settingswill be set to the following basic mode,
•
Battery level,recording mode,counter,date/time,
DiS ( E_] ) willbe displayed as the camcorderstarts to run.
• The word "EASY"will appear on the LCD at the same time,
However,the Date/Timewill only be seen if it has been
previously set.
(DiS ( _] ) wilt be displayedon SCL860/L870only)
_
F
STB_
XXXXX
EASY
JAN 31
3. Pressthe START/STOPbuttonto start recording,
•
Recordingwill begin using the basic automatic environmentsettings,
4. Pressing the EASY buttonagain turns the EASY mode off.
• The camera will return to the settingsthat were set priorto
the EASYmode being switched on.
[
Note: The Easy mode settings are stored in the camera (provideda good lithium battery has been installed).
A