Adjusting the image during recording
Symptom
Focus does not adjust
automatically.
The image appears too bright,
flickers, or changes color.
Image's color balance is not natural.
A subject passing quickly through
the frame appears distorted
Playback on your camcorder
Symptom
Playback (play/pause) function does
not work.
Photo images stored on a storage
media are not displayed in the
actual size.
Playback is interrupted
unexpectedly.
Explanation/Solution
•
Set "Focus" to "Auto."
•
The recording conditions are not suitable for auto focus. Adjust the
focus manually.
page 70
•
The lens is dusty on the surface. Clear the lens and check the
focus.
•
Recording is being made in a dark location.
Use a light to brighten the area.
•
This may occur when you make a recording under a fluorescent
sodium, or mercury lamp.
Cancel "iSCENE" to avoid or minimize this phenomenon.
page 61
•
White balance adjustment is required. Adjust to the proper "White
Balance."
page 64
•
This is called the focal plane phenomenon. This is not a
malfunction. Because of the way the image device (CMOS sensor)
reads out video signals, a subject passing through a frame rapidly
may appear to bend, depending on the recording conditions.
Explanation/Solution
•
Image files recorded using another device may not play on your
camcorder.
•
Check memory card compatibility.
•
Photo images recorded on other devices may not appear in their
actual size. This is not an error.
•
Check if the AC power adaptor or battery back is properly
connected and secure.
page 70
page 33
145