Recording
Symptom
Pressing the Recording start/stop
button does not start recording.
The actual recording time is less
than the estimated recording time.
The recording stops automatically.
When recording a subject
illuminated by bright light, a vertical
line appears.
When the screen is exposed to
direct sunlight during recording, the
screen becomes red or black for an
instant.
During recording, the date/time
does not display.
You cannot record a photo image.
You don't hear the shutter sound
when you record a photo image.
Explanation/Solution
•
Press the MODE button to set the Video record mode.
•
There is not enough free space to record on the storage media.
•
Check if memory card is not inserted or write-protect tab is set to
lock.
•
The estimated recording time may vary depending on content and
features used.
•
When you record an object that moves fast, the actual recording
time may be shortened.
•
There is no more free space for recording on the storage media.
Back up important files on your PC and format the storage media
or delete the unnecessary files.
•
If you make recordings or delete files frequently, the performance
of the storage media deteriorates. If this occurs, format the storage
media again.
•
If you use a memory card with low writing speed, the camcorder
automatically stops recording videos and a corresponding
message appears on the LCD screen.
•
This is not a malfunction.
•
This is not a malfunction.
•
"Date/Time Display" is set to "Off." Set the "Date/Time Display"
to On.
page 90
•
Set your camcorder to the Photo record mode.
•
Release the lock on the write-protection tab of the memory card if
any.
•
The storage media is full. Use a new memory card or format the
storage media.
page 97 Or remove unnecessary images.
page 110
•
Set "Shutter Sound" to "On."
•
During dual recording, the Shutter Sound is off.
•
When the Mini HDMI cable or Audio/Video cable is connected to
the camcorder, the Shutter Sound is not available.
page 27
page 27
143